Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
New Member

5510 Active/Passive configuration with Active/Active License

My ASA5510's are configured as Active/Passive, but they are licensed for Active/Active. Has anyone ever seen this and what issues will this cause on failover?

1 ACCEPTED SOLUTION

Accepted Solutions
Cisco Employee

Re: 5510 Active/Passive configuration with Active/Active License

Jason,

"Show Version" output showing Failover as Active/Active does not mean that you can

only do a active/active failover on the device, infact it means that you have a good enough

license to do active/active failover as well since active/standy is default.

Regards,

Arul

*Pls rate if it helps*

1 REPLY
Cisco Employee

Re: 5510 Active/Passive configuration with Active/Active License

Jason,

"Show Version" output showing Failover as Active/Active does not mean that you can

only do a active/active failover on the device, infact it means that you have a good enough

license to do active/active failover as well since active/standy is default.

Regards,

Arul

*Pls rate if it helps*

145
Views
0
Helpful
1
Replies
CreatePlease to create content