Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. And see here for current known issues.

New Member

7.2.2 and static nat entry

I hope someone can help.

With the static entry the host (10.0.0.5) can't get out to the internet, without the static entry the host can get out to the internet. Any ideas why this would be happining. I'm running version 7.2.2 on a pix 515. Thanks.

nat-control

global (outside) 1 70.x.x.100-70.x.x.104 netmask 255.255.255.240

global (dmz) 1 interface

nat (inside) 1 0.0.0.0 0.0.0.0

static (inside,outside) 70.x.x.105 10.0.0.105 netmask 255.255.255.255

1 REPLY
New Member

Re: 7.2.2 and static nat entry

What may be going on here is that the .105 address is falling within the 70.x.x.96/28 range. Try using a global address that falls outside this range for your static or use a /29 on the global and make sure that the ranges don't overlap.

123
Views
0
Helpful
1
Replies
CreatePlease login to create content