Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
New Member

A NAT question

Not something I've attempted before so perhaps somebody can shed some light.

Have a PIX configured with static inside translations, so servers appear with a fixed IP address on external subnet.

In addition to this I want to add a static outside translation so that all outside addresses appear to come from the same address to the host inside.

Presumably the 2 can co-exist, the result being 2 separate translations?

1 REPLY
Hall of Fame Super Blue

Re: A NAT question

Hi

I don't see any reason why this wouldn't work as you are Natting source IP addresses only so there should not be an overlap.

So to nat outside addresses you could do

nat (outside) 1 0.0.0.0 0.0.0.0 outside

global (inside) 1 "ip address" netmask 255.255.255.255

I have used NAT like this before but not for all addresses, ie i had specific subnets coming in via VPN tunnels so i have never used the 0.0.0.0 0.0.0.0 addressing for outside NAT.

Let me know if it works

Jon

127
Views
0
Helpful
1
Replies
CreatePlease to create content