Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. And see here for current known issues.

New Member

Acces to ASDM ASA 5510

Hi, i have asa 5510 with version 7.02. I configure manually ip address of management interface 192.168.1.1 and mask 255.255.255.0. I diseble DHCP and permit that subnet 192.168.1.0/24 can access via HTTP. But i try to conect https://192.168.1.1 and dont receive response.

any more topic for verify.

Thanks

2 REPLIES
Cisco Employee

Re: Acces to ASDM ASA 5510

You should have :

http server enable

http 192.168.1.0 255.255.255.0 management

and basic connectivity from PC to management interface.

Also,you can issue :

sh version command to verify if an asdm image is installed.

In the second line of the output,you would see if an asdm image is actually installed.

For making sure that there is no rogue dhcp configuration left,issue

cl config dhcpd

Try again.

Best of luck.

Do rate helpful posts.

Regards,

Sushil

New Member

Re: Acces to ASDM ASA 5510

Thanks. Very useful

141
Views
0
Helpful
2
Replies