Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Attention: The Community will be in read-only mode on 12/14/2017 from 12:00 am pacific to 11:30 am.

During this time you will only be able to see content. Other interactions such as posting, replying to questions, or marking content as helpful will be disabled for few hours.

We apologize for the inconvenience while we perform important updates to the Community.

New Member

Access Rules For URLs

I need to setup my firewall to allow a DMZ server to connect to a site via the URLs.  My DMZ server constantly polls a site (url) for updates and the IP addresses and subnetworks constantly change.  The company stated that this is standard practice and they can't tell me what the subnet will be at any given time or the range of subnets.  on my rule right now i have my DMZ server setup to go to 8 different subnets and i still failed on updates because the subnet/ip address changed to a subnet i didn't have in my rule.  Is there a way to setup the ASA so that i can put a URL in my access rule?

1 REPLY
Hall of Fame Super Blue

Re: Access Rules For URLs

craigbohon wrote:

I need to setup my firewall to allow a DMZ server to connect to a site via the URLs.  My DMZ server constantly polls a site (url) for updates and the IP addresses and subnetworks constantly change.  The company stated that this is standard practice and they can't tell me what the subnet will be at any given time or the range of subnets.  on my rule right now i have my DMZ server setup to go to 8 different subnets and i still failed on updates because the subnet/ip address changed to a subnet i didn't have in my rule.  Is there a way to setup the ASA so that i can put a URL in my access rule?

Craig

Have a read of this document and see if it helps -

http://www.cisco.com/en/US/customer/products/ps6120/products_configuration_example09186a0080940c5a.shtml

Jon

146
Views
0
Helpful
1
Replies
CreatePlease to create content