Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. And see here for current known issues.

New Member

access to branch office for vpn clients !!

Hi

This is my topology

VPN Client (192.168.20.0/24)

|

|

PIX

|

| (10.50.0.0/16)

Layer 3 Switch

-------------------------|

| |10.30.0.0

|(10.20.0.0/16) |/16

ATM Router

| (Natted)

| 172.16.29.0

| /24)

Branch Off

router

| 10.4.4.0/24

| 10.10.0.0/8

I can conneted to the 10.20.0.0/16 network I need to allow 10.4.4.0 and 10.10.0.0 networks to my VPN Clients.

Please help I have tried putting all the routes every where but still cannot connect.

my config is attached

2 REPLIES

Re: access to branch office for vpn clients !!

Simple as pie.

Add the follwing lines:

access-list 102 permit ip 10.10.0.0 255.255.0.0 192.168.20.0 255.255.255.0

access-list 102 permit ip 10.4.0.0 255.255.0.0 192.168.20.0 255.255.255.0

This will extend the NAT 0 to the desired subnets.

Please rate if this helped.

Regards,

Daniel

New Member

Re: access to branch office for vpn clients !!

thanx ..it was of great help . I just missed it and had to add the new subnet for the nat list on my branch office router and it worked.

thanx once again

108
Views
0
Helpful
2
Replies
CreatePlease login to create content