access to inside from ASA vpn client with the same IP addressing
I need give the network ip pool client vpn 10.70.253.0/24, and the network in inside is 10.70.255.0/24, when I connect VPN client from internet I can reach all network in the LAN but the segment 10.70.255.0 is imposible.
How I can do a walkarround of this problem?. I can`t change the network of pool vpn.
Re: access to inside from ASA vpn client with the same IP addres
I made a mistake with the information , the network inside is 10.70.0.0/16 and the ip pool vpn is 10.70.253.0....sorry. I beleave it is overlaping.
and it`s the result of :
Result: input-interface: inside input-status: up input-line-status: up output-interface: outside output-status: up output-line-status: up Action: drop Drop-reason: (rpf-violated) Reverse-path verify failed
I read about and I`m fear the ASA see an attempt of spoofing.
Table of ContentsIntroductionVersion HistoryPossible Future
UpdatesDocuments PurposeNAT Operation in ASA 8.3+ SectionsRule Types
Network Object NATTwice NAT / Manual NATRule Types used per SectionNAT
Types used with Twice NAT / Manual NAT and Network Obje...
[toc:faq]Introduction:This document describes details on how NAT-T
works.Background:ESP encrypts all critical information, encapsulating
the entire inner TCP/UDP datagram within an ESP header. ESP is an IP
protocol in the same sense that TCP and UDP are I...