cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
421
Views
0
Helpful
2
Replies

accessing internet through remote access-VPN

pranuvpandit
Level 1
Level 1

Hi Guys

I have configured Remote Access VPN on ASA 5510. VPN Users are authenticated and they are getting the ip address and DNS addresses. I want the VPN users to access the internet through the same ASA they are connecting to. As I have already configured PAT on the firewall and Local Lan users are using internet through this ASA only. I want the VPN users should also access the internet through the same firewall instead of using their own Local Lan(we do basically by using split tunnelling).

Please suggest.

1 Accepted Solution

Accepted Solutions

JORGE RODRIGUEZ
Level 10
Level 10

If your RA tunnel is full tunnel this is what you need. Hairpining , you RA VPN need to be full tunnel, no split.

same-security-traffic permit intra-interface

nat (outside) 1

[edit]

Example here

http://www.cisco.com/en/US/products/hw/vpndevc/ps2030/products_configuration_example09186a00805734ae.shtml

PLS rate any helpful post

Rgds

Jorge

Jorge Rodriguez

View solution in original post

2 Replies 2

JORGE RODRIGUEZ
Level 10
Level 10

If your RA tunnel is full tunnel this is what you need. Hairpining , you RA VPN need to be full tunnel, no split.

same-security-traffic permit intra-interface

nat (outside) 1

[edit]

Example here

http://www.cisco.com/en/US/products/hw/vpndevc/ps2030/products_configuration_example09186a00805734ae.shtml

PLS rate any helpful post

Rgds

Jorge

Jorge Rodriguez

Thanx Jorge

Its working now.....

Review Cisco Networking products for a $25 gift card