Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. And see here for current known issues.

New Member

acl on pix 501

I have 2 access lists on my pix 501. When I apply each as access group to the same interface only one takes. Is this normal? How do I apply 2 access groups to the inside interface? Thanks in advance.

1 ACCEPTED SOLUTION

Accepted Solutions
Silver

Re: acl on pix 501

You can only have 1 access-group on one interface of PIX. However, within that access-group you can have multiple access-list lines. One more thing, on all PIXes running 6.x and earlier versions, the access-group can only be applied in "inbound" direction.

2 REPLIES
Silver

Re: acl on pix 501

You can only have 1 access-group on one interface of PIX. However, within that access-group you can have multiple access-list lines. One more thing, on all PIXes running 6.x and earlier versions, the access-group can only be applied in "inbound" direction.

New Member

Re: acl on pix 501

well that explains it, thanks for the info!

160
Views
0
Helpful
2
Replies
CreatePlease login to create content