Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. And see here for current known issues.

New Member

ACL to Permit Access to Port 8090

Pix 515E 6.3(5)

I need to permit my users access to an external website that uses port 8090.

Would this be correct?

access-list permit tcp 192.168.1.0 255.255.255.0 any eq 8090

Would I also need:

Fixup protocol http 8090

Thanks.

3 REPLIES
Bronze

Re: ACL to Permit Access to Port 8090

If you put only the access-list it will work.

If you want the PIX to verify traffic of port 8090 in http layer 7 protocol you need fixup.

You must see if there is already a NAT from inside going outside and it's not using an access list with port on it. If so you need to add the same line of access list in the NAT ACL

New Member

Re: ACL to Permit Access to Port 8090

Thanks quibarati. I forgot about NAT. It works now.

Bronze

Re: ACL to Permit Access to Port 8090

Rate please.

222
Views
0
Helpful
3
Replies