Activating CSC-SSM Module with no in house email server
Hello. I am installing a Cisco 5510 7.1.2 with the CSC SSM Module. for the most part I have the firewall up and running but I cannot activate the CSC module because we do not have an internal email server. When I go thru the wizard I put my domain and address but unsuccesfully finishes the activation so I cannot route http traffic to the module for website blocking/filtering. Is there a workaround to this? Thanks in advance
Re: Activating CSC-SSM Module with no in house email server
email server ip address is not a mandatory field and you can leave it if you do not have or use a email server. If you are not able to finish the activiation there may be some problem with your activaition key or some other setting. Following link may help you
Login to the FXOS chassis manager.
Direct your browser to https://hostname/, and log-in using the user-name and password.
Go to Help > About and check the current version:
Check the current version availa...
We have configured the outside and inside Interface with official ipv6 adresses, set a default route on outside Interface to our router, we also have definied a rule , which also gets hits, to permit tcp from inside Interface to any6.
In Syslog I also se...