Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. And see here for current known issues.

New Member

Active unit and PDM warning replication message

I have got two PIXs, Primary and Secondary

Primary (192.168.1001.1) is Standby

Secondary (192.168.1001.2) is Active

When I try to access the PDM from primary (Standby) I could not, but I was able to access PDM for Secondary (Active)

Secondary?s PDM Tools --> Command Line Interface --> config terminal,,,,I received this error message

<quote>

Result of firewall command: "config ter"

**** WARNING ***

Configuration Replication is NOT performed from Standby unit to Active unit.

Configurations are no longer synchronized.

</quote>

1- In the above message why it says Standby unit ?, while I have issued the command (config terminal ) within Active unit, not Standby unit

2- How can I find user privilege level from within PDM ?

PIX# show failover,,,,,,,,,,,,,,,,,,,,current one

Failover On

Cable status: Normal

Reconnect timeout 0:00:00

Poll frequency 15 seconds

Last Failover at: 00:53:35 UTC Sat Nov 11 2006

This host: Secondary - Active

Active time: 4705650 (sec)

Interface outside (10.1.1.130): Normal (Waiting)

Interface inside (192.168.100.1): Normal

!

!

Other host: Primary - Standby

Active time: 15838095 (sec)

Interface outside (192.168.105.2): Normal (Waiting)

Interface inside (192.168.100.2): Normal

This was the backup configuration:,,,,,,,,,,,,,,,,,,,,,in our Archive

--------------------------------------------

PIX# show failover

Failover On

Cable status: Normal

Reconnect timeout 0:00:00

Poll frequency 15 seconds

Last Failover at: 02:46:02 UTC Mon Oct 4 1993

This host: Primary - Active

Active time: 15931095 (sec)

Interface outside (10.1.1.130): Normal (Waiting)

Interface inside (192.168.100.1): Normal

Other host: Secondary - Standby

Active time: 4761990 (sec)

Interface outside (192.168.105.2): Normal (Waiting)

Interface inside (192.168.100.2): Normal

Stateful Failover Logical Update Statistics

Link : Unconfigured.

1 REPLY
Bronze

Re: Active unit and PDM warning replication message

The error message is generated when PIX in failover are not syncing up.

Refer this url for more information,

http://www.cisco.com/warp/public/110/failover.html#copy

883
Views
0
Helpful
1
Replies
CreatePlease login to create content