Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements
Step-by-Step Configuration and Troubleshooting Best Practices for the NGFW, NGIPS and AMP Technologies A Visual Guide to the Cisco Firepower Threat Defense (FTD)
New Member

Add Port in object group

Hi, I have make a object-group and add port-objects in the FW. Few ports are added in object group and an access list is also configured that is using object-group. Now I want to add a new port 9800 in object-group.

object-group service Services tcp

description Services assign for Internal DMZ machines from Outside Network access

port-object eq 3389

port-object eq 5000

port-object eq 6565

port-object eq 8800

port-object eq ftp

port-object eq ftp-data

port-object eq www

port-object eq https

port-object eq smtp

access-list outside_access_in remark Servers which will be assess from Public IP for Outside Network

access-list outside_access_in extended permit tcp any object-group Servers object-group Services

Thanks

2 REPLIES

Re: Add Port in object group

Hi ..

Connect to the firewall by using telnet ( if allowed) or ssh. Enter username and password as requested. Next Type in config t to enter to config mode. Form there type in object-group service Services tcp and then type in port-object eq 9800. Then type in exit twice and test it. Once you are happy then save the changes by typing wr mem

I hope it helps .. please rate helpful posts !!!

New Member

Re: Add Port in object group

Thanks!!

216
Views
0
Helpful
2
Replies
CreatePlease to create content