Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Attention: The Cisco Support Community site will be in read only mode on Dec14, 2017 from 12:01am PST to 11:30am for standard maintenance. Sorry for the inconvenience.

New Member

Adding a route in the ASA

Hello Everyone,

If I need to add the following route in the ASA:

Destination:192.168.0.0 255.255.255.0

next hop: 10.0.0.2

Should the command be:

route 192.168.0.0 255.255.255.0 10.0.0.2?

Thanks in advance! All replies rated

1 ACCEPTED SOLUTION

Accepted Solutions
Cisco Employee

Re: Adding a route in the ASA

You will also need the interface that you will be going out on. Lets say it is interface xxx. then the command will be

route xxx 192.168.0.0 255.255.255.0 10.0.0.2

PK

1 REPLY
Cisco Employee

Re: Adding a route in the ASA

You will also need the interface that you will be going out on. Lets say it is interface xxx. then the command will be

route xxx 192.168.0.0 255.255.255.0 10.0.0.2

PK

102
Views
0
Helpful
1
Replies
CreatePlease to create content