Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. If you'd prefer to explore, try our test area to get started. And see here for current known issues.

New Member

adding MAC address to firewall to guest access on IPHONE

Question...

I had a user that needs to access our guest wireless network from his Iphone. He told me anywhere he goes, he just gives the IT dept his MAC address and they add it on thier firewall so he can have access...

How do i do that? I have an ASA firewall 5520.

For now, i just gave him the SSID and password for access, but his way sounds more secure.

HELP!!!!!

  • Firewalling
1 ACCEPTED SOLUTION

Accepted Solutions

Re: adding MAC address to firewall to guest access on IPHONE

Hi Dustin,

This is slightly outside of my area of expertise, but I think you will want to look at the MAC-based ACL filters on the AP. See below for some configuration guides that explain the process you'll want to follow.

Here is the configuration guide for the CLI:

http://www.cisco.com/en/US/tech/tk722/tk809/technologies_configuration_example09186a008058ed26.shtml#macbasedacls

Here is the configuration guide for the Web-based config:

http://www.cisco.com/web/techdoc/wireless/access_points/online_help/eag/123-08.JA/1100/h_ap_services_filters-mac.html

The settings you are looking for are under Services>Filters>MAC Address Filters in the Web-based config.

Hope that helps.

-Mike

5 REPLIES

Re: adding MAC address to firewall to guest access on IPHONE

Dustin,

Something like this is not done on your ASA. Instead, you would want to look into the MAC address filter feature on your wireless access point.

Hope that helps.

-Mike

New Member

Re: adding MAC address to firewall to guest access on IPHONE

I can do that..I appreciate your help!..just add the MAC address?.. its a AP 1130

New Member

Re: adding MAC address to firewall to guest access on IPHONE

Can you tell me how to add the MAC address on the WAP?

Re: adding MAC address to firewall to guest access on IPHONE

Hi Dustin,

This is slightly outside of my area of expertise, but I think you will want to look at the MAC-based ACL filters on the AP. See below for some configuration guides that explain the process you'll want to follow.

Here is the configuration guide for the CLI:

http://www.cisco.com/en/US/tech/tk722/tk809/technologies_configuration_example09186a008058ed26.shtml#macbasedacls

Here is the configuration guide for the Web-based config:

http://www.cisco.com/web/techdoc/wireless/access_points/online_help/eag/123-08.JA/1100/h_ap_services_filters-mac.html

The settings you are looking for are under Services>Filters>MAC Address Filters in the Web-based config.

Hope that helps.

-Mike

New Member

Re: adding MAC address to firewall to guest access on IPHONE

take a look at the attachment. I think i found it. Let me know.. THanks again for all your help!

205
Views
0
Helpful
5
Replies
This widget could not be displayed.