How can I update the expired certificate in AIP-SSM-10 Module using CLI or ASDM.....Here;s the output from the device....and also is there a way I can generate some daily or weekly reports in a graphs.
edge-s2# show version Application Partition:
Cisco Intrusion Prevention System, Version 7.0(2)E4
Host: Realm Keys key1.0 Signature Definition: Signature Update S613.0 2011-12-16 OS Version: 2.4.30-IDS-smp-bigphys Platform: ASA-SSM-10 Serial Number: XXXXXXXXXX
Licensed, expires: 28-Jul-2012 UTC Sensor up-time is 312 days. Using 670720000 out of 1032495104 bytes of available memory (64% usage) system is using 17.4M out of 38.5M bytes of available disk space (45% usage) application-data is using 45.4M out of 166.8M bytes of available disk space (29% usage) boot is using 41.6M out of 68.6M bytes of available disk space (64% usage) application-log is using 123.5M out of 513.0M bytes of available disk space (24% usage)
Table of ContentsIntroductionVersion HistoryPossible Future
UpdatesDocuments PurposeNAT Operation in ASA 8.3+ SectionsRule Types
Network Object NATTwice NAT / Manual NATRule Types used per SectionNAT
Types used with Twice NAT / Manual NAT and Network Obje...
Table of Contents Introduction:This document describes details on how
NAT-T works. Background: ESP encrypts all critical information,
encapsulating the entire inner TCP/UDP datagram within an ESP header.
ESP is an IP protocol in the same sense that TCP an...