Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. And see here for current known issues.

New Member

alias replacement to satisfy asdm

Hi there,

I am using alias command to give access to a server via it's public IP address (the dns server returns a private one). The syntax is:

alias (inside) 192.168.51.125 195.x.y.z 255.255.255.255

This works great. However asdm doesn't like alias command, there is something about bi-directional nat etc. I have tried to configure it but I failed, unfortunately don't have a chance to test it (they really need access to it almost all the time).

Any suggestions?

Thanks

1 ACCEPTED SOLUTION

Accepted Solutions
Hall of Fame Super Blue

Re: alias replacement to satisfy asdm

2 REPLIES
New Member

Re: alias replacement to satisfy asdm

I would recommend using the STATIC command here. The syntax would be:

static (inside,outside) 195.x.y.z 192.168.51.125 netmask 255.255.255.255.

If DNS points to your private address, this should work just fine.

Hall of Fame Super Blue

Re: alias replacement to satisfy asdm

379
Views
0
Helpful
2
Replies
CreatePlease login to create content