Allow all traffic from frame relay

[Dario Francesco Vanin]

Hi experts,

I am installing an ASA 5520 and I have a problem on accepring the incoming traffic from an external office connected via Frame Relay.

On my OUTSIDE interface I have both the internet traffic and the external office traffic incoming. What comes from the external office is visible as 10.1.0.0/16.

I have to allow this traffic to enter the internal network, without any control. I would also keep the original IP address.

I have configured the Firewall but I don't know how to setup the NAT. Can you please help me doing it?

Thanks,

Dario

[Dario Francesco Vanin]

The error I have is as follow:

%ASA-5-305013: Asymmetric NAT rules matched for forward and reverse 

[Dario Francesco Vanin]

I've fixed. IT is necessary to add an EXEMPT in the NAT rules.