Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. And see here for current known issues.

Allow all traffic from frame relay

Hi experts,

I am installing an ASA 5520 and I have a problem on accepring the incoming traffic from an external office connected via Frame Relay.

On my OUTSIDE interface I have both the internet traffic and the external office traffic incoming. What comes from the external office is visible as 10.1.0.0/16.

I have to allow this traffic to enter the internal network, without any control. I would also keep the original IP address.

I have configured the Firewall but I don't know how to setup the NAT. Can you please help me doing it?

Thanks,

Dario

2 REPLIES

Allow all traffic from frame relay

The error I have is as follow:


%ASA-5-305013: Asymmetric NAT rules matched for forward and reverse 

Allow all traffic from frame relay

I've fixed. IT is necessary to add an EXEMPT in the NAT rules.

269
Views
0
Helpful
2
Replies