Hi all, i have recently configured a cisco ASA, it is in transparent mode, there are 2 switches between the device, 1 plugs in the inside vlan, the other on the outside vlan, for some reason it is not letting bpdu's through it, I have allowed them through via a ethertype access list but still not working, can anyone help asap ?
Table of ContentsIntroductionVersion HistoryPossible Future
UpdatesDocuments PurposeNAT Operation in ASA 8.3+ SectionsRule Types
Network Object NATTwice NAT / Manual NATRule Types used per SectionNAT
Types used with Twice NAT / Manual NAT and Network Obje...
Table of Contents Introduction:This document describes details on how
NAT-T works. Background: ESP encrypts all critical information,
encapsulating the entire inner TCP/UDP datagram within an ESP header.
ESP is an IP protocol in the same sense that TCP an...