So the scenario is that we have an exchange server with one leg on the Inside interface (my DMZ) and I want to NAT that to one of my public range of addresses. These are nnn.nn.n.232/29. The ISP has .233, the ASA outside interface is .234 and I want to use .235 as the static NAT to xxx.xx.199.10 (out inside DMZ network).
I have put the following config on:
ASA Version 9.1(1)
!
hostname MAIN-ASA
domain-name nnnnnnn.lllll
enable password jjjjjjjjjj
names
dns-guard
!
interface GigabitEthernet0/0
speed 100
duplex full
nameif outside
security-level 50
ip address nnn.nn.5.234 255.255.255.248
!
interface GigabitEthernet0/1
nameif inside
security-level 50
ip address xxx.xx.199.1 255.255.255.0
!
!
interface Management0/0
management-only
nameif management
security-level 100
ip address xxx.xx.140.223 255.255.255.0
!
boot system disk0:/asa911-smp-k8.bin
ftp mode passive
dns domain-lookup outside
dns server-group DefaultDNS
name-server 8.8.8.8
domain-name jjjjjjjjj.lllllll
same-security-traffic permit inter-interface
same-security-traffic permit intra-interface
object network servers
subnet yyy.yyy.0.0 255.255.255.0
object network IT-PC
host yyy.yyy.1.22
description IT dept PC
host xxx.xx.199.128
object network Exchange-NAT
host nnn.nn.5.235
description Outside exchange NAT
object network Exchange-internal-NAT
host xxx.xx.199.11
description Inside Exchange NAT
object-group network users
network-object yyy.yyy.1.0 255.255.255.0
object-group network DM_INLINE_NETWORK_1
network-object xxx.xx.199.0 255.255.255.0
network-object object servers
object-group network DM_INLINE_NETWORK_3
network-object object Exchange-NAT
network-object object Exchange-internal-NAT
object-group service DM_INLINE_TCP_1 tcp
port-object eq https
port-object eq smtp
port-object eq echo
object-group network exchange-external
network-object
network-object
network-object
object-group network DM_INLINE_NETWORK_4
network-object object Exchange-NAT
network-object object Exchange-internal-NAT
object-group service DM_INLINE_TCP_2 tcp
port-object eq https
port-object eq smtp
access-list inside_access_in extended permit ip object-group DM_INLINE_NETWORK_1 any log debugging
access-list inside_access_in extended permit ip object IT-PC any log debugging
access-list outside_access_in extended permit tcp any object-group DM_INLINE_NETWORK_3 object-group DM_INLINE_TCP_1 log debugging
access-list outside_access_in extended permit tcp object-group exchange-external object-group DM_INLINE_NETWORK_4 object-group DM_INLINE_TCP_2 log debugging
pager lines 24
logging enable
logging asdm informational
mtu outside 1500
mtu inside 1500
mtu management 1500
no failover
icmp unreachable rate-limit 1 burst-size 1
icmp permit any outside
icmp permit any inside
asdm image disk0:/asdm-66114.bin
no asdm history enable
arp timeout 14400
no arp permit-nonconnected
nat (outside,any) source static any any destination static Exchange-NAT Exchange-internal-NAT
nat (inside,outside) source dynamic any interface
access-group outside_access_in in interface outside
access-group inside_access_in in interface inside
route outside 0.0.0.0 0.0.0.0 nnn.nn.5.233 1
route inside yyy.yyy.0.0 255.255.255.0 xxx.xx.199.254 1
route inside yyy.yyy.1.0 255.255.255.0 xxx.xx.199.254 1
timeout xlate 3:00:00
timeout pat-xlate 0:00:30
timeout conn 1:00:00 half-closed 0:10:00 udp 0:02:00 icmp 0:00:02
timeout sunrpc 0:10:00 h323 0:05:00 h225 1:00:00 mgcp 0:05:00 mgcp-pat 0:05:00
timeout sip 0:30:00 sip_media 0:02:00 sip-invite 0:03:00 sip-disconnect 0:02:00
timeout sip-provisional-media 0:02:00 uauth 0:05:00 absolute
timeout tcp-proxy-reassembly 0:01:00
timeout floating-conn 0:00:00
dynamic-access-policy-record DfltAccessPolicy
user-identity default-domain LOCAL
aaa authentication ssh console LOCAL
http server enable
http xxx.xx.1.0 255.255.255.0 management
http xxx.xx.140.0 255.255.255.0 management
no snmp-server location
no snmp-server contact
snmp-server enable traps snmp authentication linkup linkdown coldstart warmstart
sysopt noproxyarp inside
sysopt noproxyarp management
crypto ipsec security-association pmtu-aging infinite
crypto ca trustpool policy
telnet xxx.xx.140.0 255.255.255.0 management
telnet timeout 5
ssh xxx.xx.140.0 255.255.255.0 management
ssh timeout 5
console timeout 0
management-access management
vpdn group SRH-Group request dialout pppoe
vpdn group SRH-Group localname zen258800@zen
vpdn group SRH-Group ppp authentication chap
threat-detection basic-threat
threat-detection statistics access-list
no threat-detection statistics tcp-intercept
username admin password e8gq2.ujS/CECBVS encrypted
!
class-map inspection_default
match default-inspection-traffic
!
!
policy-map type inspect dns preset_dns_map
parameters
message-length maximum client auto
message-length maximum 512
policy-map global_policy
class inspection_default
inspect dns preset_dns_map
inspect ftp
inspect h323 h225
inspect h323 ras
inspect rsh
inspect rtsp
inspect esmtp
inspect sqlnet
inspect skinny
inspect sunrpc
inspect xdmcp
inspect sip
inspect netbios
inspect tftp
inspect ip-options
!
service-policy global_policy global
prompt hostname context
no call-home reporting anonymous
Cryptochecksum:2005faa8a0512f111117f8a6cb654888
: end
I can't seem to get it working even though the packet tracer says it should work. Here is the "sh xlate" output.
MAIN-ASA# sh xlate
6 in use, 200 most used
Flags: D - DNS, e - extended, I - identity, i - dynamic, r - portmap,
s - static, T - twice, N - net-to-net
NAT from outside:0.0.0.0/0 to any:0.0.0.0/0
flags sIT idle 0:11:24 timeout 0:00:00
NAT from any:192.168.199.11 to outside:194.12.5.235
flags sT idle 0:11:24 timeout 0:00:00
NAT from outside:0.0.0.0/0 to inside:0.0.0.0/0
flags sIT idle 0:55:57 timeout 0:00:00
TCP PAT from inside:yyy.yyy.0.215/63102 to outside:nn.nn.5.234/63102 flags ri idle 0:54:45 timeout 0:00:30
UDP PAT from inside:yyy.yyy.0.40/6881 to outside:nn.nn.5.234/6881 flags ri idle 0:00:01 timeout 0:00:30
TCP PAT from inside:yyy.yyy.0.95/50020 to outside:nn.nn.5.234/50020 flags ri idle 0:00:48 timeout 0:00:30
any ideas really really appreciated.
Tim
