03-16-2012 11:05 PM - edited 03-11-2019 03:43 PM
When AnyConnect users try to connect to the internet it will not let them out. I've included a copy of my config below. Also, I have a 5505 with base license but the AnyConnect for mobile is disabled. I got what seems to be a demo license from Cisco for 91 days. I thought that the base license came with AnyConnect for 2 devices. Why is the AnyConnect for mobile disabled by default?
ASA Version 8.4(2)
!
hostname ASA5505
domain-name <removed>
enable password <removed>
passwd <removed>
names
!
interface Ethernet0/0
switchport access vlan 2
!
interface Ethernet0/1
!
interface Ethernet0/2
!
interface Ethernet0/3
!
interface Ethernet0/4
!
interface Ethernet0/5
!
interface Ethernet0/6
!
interface Ethernet0/7
!
interface Vlan1
nameif inside
security-level 100
ip address 10.10.10.1 255.255.255.0
!
interface Vlan2
nameif outside
security-level 0
ip address dhcp setroute
!
banner motd
banner motd +...................................................-+
banner motd | |
banner motd | *** Unauthorized Use or Access Prohibited *** |
banner motd | |
banner motd | For Authorized Official Use Only |
banner motd | You must have explicit permission to access or |
banner motd | configure this device. All activities performed |
banner motd | on this device will be logged, and violations of |
banner motd | this policy may result in disciplinary action, and |
banner motd | may be reported to law enforcement authorities. |
banner motd | |
banner motd | There is no right to privacy on this device. |
banner motd | |
banner motd +...................................................-+
ftp mode passive
clock timezone CST -6
clock summer-time CDT recurring
dns domain-lookup inside
dns domain-lookup outside
dns server-group DefaultDNS
name-server 68.105.28.12
name-server 68.105.29.12
domain-name ok.cox.net
same-security-traffic permit inter-interface
same-security-traffic permit intra-interface
object network INSIDE-HOSTS
subnet 10.10.10.0 255.255.255.0
object network AnyConnect-INET
subnet 192.168.10.0 255.255.255.0
access-list Internet_IN extended permit icmp any interface outside echo-reply
access-list Internet_IN extended permit icmp any interface outside
pager lines 24
logging enable
logging timestamp
logging buffered informational
logging asdm informational
mtu inside 1500
mtu outside 1500
ip local pool vpnpool 192.168.10.1-192.168.10.254 mask 255.255.255.0
icmp unreachable rate-limit 1 burst-size 1
icmp permit any inside
icmp permit any echo-reply inside
icmp permit any echo-reply outside
icmp permit any outside
no asdm history enable
arp timeout 14400
nat (inside,outside) source dynamic AnyConnect-INET interface
!
object network INSIDE-HOSTS
nat (inside,outside) dynamic interface
access-group Internet_IN in interface outside
timeout xlate 3:00:00
timeout conn 1:00:00 half-closed 0:10:00 udp 0:02:00 icmp 0:00:02
timeout sunrpc 0:10:00 h323 0:05:00 h225 1:00:00 mgcp 0:05:00 mgcp-pat 0:05:00
timeout sip 0:30:00 sip_media 0:02:00 sip-invite 0:03:00 sip-disconnect 0:02:00
timeout sip-provisional-media 0:02:00 uauth 0:05:00 absolute
timeout tcp-proxy-reassembly 0:01:00
timeout floating-conn 0:00:00
dynamic-access-policy-record DfltAccessPolicy
user-identity default-domain LOCAL
aaa authentication http console LOCAL
aaa authentication ssh console LOCAL
http server enable
http 10.10.10.0 255.255.255.0 inside
no snmp-server location
no snmp-server contact
snmp-server enable traps snmp authentication linkup linkdown coldstart warmstart
crypto ipsec ikev1 transform-set ESP-AES-256-MD5 esp-aes-256 esp-md5-hmac
crypto ipsec ikev1 transform-set ESP-DES-SHA esp-des esp-sha-hmac
crypto ipsec ikev1 transform-set ESP-3DES-SHA esp-3des esp-sha-hmac
crypto ipsec ikev1 transform-set ESP-DES-MD5 esp-des esp-md5-hmac
crypto ipsec ikev1 transform-set ESP-AES-192-MD5 esp-aes-192 esp-md5-hmac
crypto ipsec ikev1 transform-set ESP-3DES-MD5 esp-3des esp-md5-hmac
crypto ipsec ikev1 transform-set ESP-AES-256-SHA esp-aes-256 esp-sha-hmac
crypto ipsec ikev1 transform-set ESP-AES-128-SHA esp-aes esp-sha-hmac
crypto ipsec ikev1 transform-set ESP-AES-192-SHA esp-aes-192 esp-sha-hmac
crypto ipsec ikev1 transform-set ESP-AES-128-MD5 esp-aes esp-md5-hmac
crypto dynamic-map SYSTEM_DEFAULT_CRYPTO_MAP 65535 set ikev1 transform-set ESP-AES-128-SHA ESP-AES-128-MD5 ESP-AES-192-SHA ESP-AES-192-MD5 ESP-AES-256-SHA ESP-AES-256-MD5 ESP-3DES-SHA ESP-3DES-MD5 ESP-DES-SHA ESP-DES-MD5
crypto map outside_map 65535 ipsec-isakmp dynamic SYSTEM_DEFAULT_CRYPTO_MAP
crypto map outside_map interface outside
crypto ikev1 enable outside
crypto ikev1 policy 10
authentication crack
encryption aes-256
hash sha
group 2
lifetime 86400
crypto ikev1 policy 20
authentication rsa-sig
encryption aes-256
hash sha
group 2
lifetime 86400
crypto ikev1 policy 30
authentication pre-share
encryption aes-256
hash sha
group 2
lifetime 86400
crypto ikev1 policy 40
authentication crack
encryption aes-192
hash sha
group 2
lifetime 86400
crypto ikev1 policy 50
authentication rsa-sig
encryption aes-192
hash sha
group 2
lifetime 86400
crypto ikev1 policy 60
authentication pre-share
encryption aes-192
hash sha
group 2
lifetime 86400
crypto ikev1 policy 70
authentication crack
encryption aes
hash sha
group 2
lifetime 86400
crypto ikev1 policy 80
authentication rsa-sig
encryption aes
hash sha
group 2
lifetime 86400
crypto ikev1 policy 90
authentication pre-share
encryption aes
hash sha
group 2
lifetime 86400
crypto ikev1 policy 100
authentication crack
encryption 3des
hash sha
group 2
lifetime 86400
crypto ikev1 policy 110
authentication rsa-sig
encryption 3des
hash sha
group 2
lifetime 86400
crypto ikev1 policy 120
authentication pre-share
encryption 3des
hash sha
group 2
lifetime 86400
crypto ikev1 policy 130
authentication crack
encryption des
hash sha
group 2
lifetime 86400
crypto ikev1 policy 140
authentication rsa-sig
encryption des
hash sha
group 2
lifetime 86400
crypto ikev1 policy 150
authentication pre-share
encryption des
hash sha
group 2
lifetime 86400
telnet timeout 5
ssh 10.10.10.0 255.255.255.0 inside
ssh timeout 5
console timeout 0
dhcpd auto_config outside
dhcpd update dns both
!
dhcpd address 10.10.10.25-10.10.10.50 inside
dhcpd dns 68.105.28.12 68.105.29.12 interface inside
dhcpd enable inside
!
threat-detection basic-threat
threat-detection statistics access-list
no threat-detection statistics tcp-intercept
webvpn
enable outside
anyconnect image disk0:/anyconnect-win-2.5.2014-k9.pkg 1
anyconnect enable
tunnel-group-list enable
group-policy "Client Group" internal
group-policy "Client Group" attributes
wins-server none
dns-server value <removed>
vpn-tunnel-protocol ikev1 ikev2 ssl-client ssl-clientless
split-tunnel-policy tunnelall
default-domain value <removed>
split-dns value <removed>
webvpn
anyconnect ssl rekey time none
anyconnect ssl rekey method ssl
anyconnect ask none default anyconnect
username <removed> password <removed> privilege 15
username <removed> attributes
webvpn
anyconnect ask none default anyconnect
username <removed> password <removed> privilege 15
tunnel-group TunnelGroup1 type remote-access
tunnel-group TunnelGroup1 general-attributes
address-pool vpnpool
default-group-policy "Client Group"
tunnel-group TunnelGroup1 webvpn-attributes
group-alias ssl_group_users enable
!
class-map inspection_default
match default-inspection-traffic
!
!
policy-map type inspect dns preset_dns_map
parameters
message-length maximum client auto
message-length maximum 512
policy-map global_policy
class inspection_default
inspect dns preset_dns_map
inspect ftp
inspect h323 h225
inspect h323 ras
inspect ip-options
inspect netbios
inspect rsh
inspect rtsp
inspect skinny
inspect esmtp
inspect sqlnet
inspect sunrpc
inspect tftp
inspect sip
inspect xdmcp
!
service-policy global_policy global
prompt hostname context
no call-home reporting anonymous
call-home
profile CiscoTAC-1
no active
destination address http https://tools.cisco.com/its/service/oddce/services/DDCEService
destination address email callhome@cisco.com
destination transport-method http
subscribe-to-alert-group diagnostic
subscribe-to-alert-group environment
subscribe-to-alert-group inventory periodic monthly
subscribe-to-alert-group configuration periodic monthly
subscribe-to-alert-group telemetry periodic daily
Cryptochecksum:943c1846a54a525f95905e6ebe313048
: end
03-16-2012 11:42 PM
I found part of my problem. There wasn't nat (outside,outside) dynamic interface applyed to the AnyConnect object network. The other half of my question is still a mystery. How come the AnyConnect for Mobile is off by default on a base license when it's supposed to come with 2 AnyConnect mobile licenses installed?
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide