Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. If you'd prefer to explore, try our test area to get started. And see here for current known issues.

New Member

Anyone try to use the ASDM 6.2(3) or ASDM 6.2(5) demo mode downloads?

I have had problems trying to run ASDM-demo versions 6.2(3) and 6.2(5)

in demo mode....The attached screenshot shows what I get....it is as if the

demo software is missing; the image size for these downloads exceeds the

size of the ASDM demo 6.2(1) which works just fine.  Is there something I am

missing in installing the newer versions?

  • Firewalling
5 REPLIES
Cisco Employee

Re: Anyone try to use the ASDM 6.2(3) or ASDM 6.2(5) demo mode d

Hi,

Have you installed the file asdm-demo-625.msifrom the below link:

http://tools.cisco.com/support/downloads/go/ImageList.x?relVer=6.2.5&mdfid=279513399&sftType=Adaptive+Security+Appliance+%28ASA%29+Device+Manager&optPlat=&nodecount=3&edesignator=null&modelName=Cisco+Adaptive+Security+Device+Manager&treeMdfId=2684381...

If not, please install that and then run it in demo mode to see if it works fine. Let me know how it goes!!

Thanks and Regards,

Prapanch

New Member

Re: Anyone try to use the ASDM 6.2(3) or ASDM 6.2(5) demo mode d

Prapanch,

...No, this is the same distribution that gave me the error.

After I posted this note, I found the Bugtraq message

attached; however, I could not find a demo mode release

6.2(5.50) referenced in this posting.  If you could point me

in the right direction to download that, it would be appreciated.

Thanks,

Doug

Cisco Employee

Re: Anyone try to use the ASDM 6.2(3) or ASDM 6.2(5) demo mode d

Hi,

Seems to indeed be that bug. To get that version, you will need to open up a TAC case and get this file published for you. It is not available for download on CCO.

Hope this helps!!

Thanks and Regard,

Prapanch

New Member

Re: Anyone try to use the ASDM 6.2(3) or ASDM 6.2(5) demo mode d

Could you please point me to a URL

to submit a TAC case for this?  Seems

like the web page I get to wants a serial

number for a hardware device....All I

want is a general TAC submission page.

Thanks,

Doug

Cisco Employee

Re: Anyone try to use the ASDM 6.2(3) or ASDM 6.2(5) demo mode d

Hi,

You need a serial number under a Valid contract for opening up a TAC case. its not possible to do it without that.

1446
Views
0
Helpful
5
Replies
This widget could not be displayed.