Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements
Step-by-Step Configuration and Troubleshooting Best Practices for the NGFW, NGIPS and AMP Technologies A Visual Guide to the Cisco Firepower Threat Defense (FTD)
Community Member

Appliance software Upgrade

Hi Guys

am looking for link that help me to upgrade the following Software:

IPS-4240:Software Upgrade from 6.0 to 7.0

-------------

ASA-5520: From 7.2 to 8.2

----------------

Thanks and Appreciate

2 REPLIES
Cisco Employee

Re: Appliance software Upgrade

With upgrading the IPS from 6.0 to 7.0, the easiest is to upgrade it via the IDM as follows:

Configuration --> Sensor Management --> UpdateSensor --> Update is located on this client --> upload the upgrade package from your desktop --> click on the "Update Sensor" button

With upgrading the ASA from 7.2 to 8.2.2 (asa822-k8.bin), you can upgrade it via ASDM or CLI as follows:

ASDM --> Tools --> Upgrade Software from Local Computer --> Image to Upload: ASA --> browse to your local computer and upload the ASA image --> Update Image --> and reload after saving the configuration and changing the boot system.

CLI --> copy tftp flash:

http://www.cisco.com/en/US/docs/security/asa/asa82/command/reference/c4.html#wp2143863

Then set the boot system: boot system flash:/asa822-k8.bin

Hope that helps.

Community Member

Re: Appliance software Upgrade

Thanks

394
Views
5
Helpful
2
Replies
CreatePlease to create content