Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements
Step-by-Step Configuration and Troubleshooting Best Practices for the NGFW, NGIPS and AMP Technologies A Visual Guide to the Cisco Firepower Threat Defense (FTD)
New Member

ASA 5505 8.2(1) is rebooting after high xlate usage

I have ASA that just started to reboot through out the day yesterday. It seems to happen every few hours but not in a pattern.

Right before it reboots there is a flood of sys log id 305006 messages "portmap translation creation failed for tcp src inside:xxx dst outside:xxx

The xlats go from around 2-3k to about 30+k then crash.

Memory ussage is already pretty high normaly on this device (about %75 used) CPU is around %15-20

I notice that the portmap translation errors are always from 3 inside host.

Is there a known bug about this?

Everyone's tags (1)
4 REPLIES
New Member

ASA 5505 8.2(1) is rebooting after high xlate ussage

Any thoughts?

New Member

ASA 5505 8.2(1) is rebooting after high xlate ussage

Anyone know of a next step I can take to find a cause for this issue?

ASA 5505 8.2(1) is rebooting after high xlate usage

Does your ASA has 1GB of memory installed, if not install 1GB it is requirement for 8.2.

thanks

New Member

ASA 5505 8.2(1) is rebooting after high xlate usage

557
Views
0
Helpful
4
Replies
CreatePlease to create content