I have an issue connecting to a ftp server using a Windows pc sitting behind an ASA5505. I have tried command line and using Filezilla. With command line is states connected then connection closed by remote host. With Filezilla is states connected and then waiting for welcome message...then disconnects. I have verified the inspect ftp is implemented and also tried without just to check. I have tried at several locations and the locations that have a cisco asa5505 or pix501 do not connect but other loocations that have let say a linksys router connect fine. Any ideas? Is there something I am missing with the ASA or Pix? Any help would be apperciated. Thanks.
Table of ContentsIntroductionVersion HistoryPossible Future
UpdatesDocuments PurposeNAT Operation in ASA 8.3+ SectionsRule Types
Network Object NATTwice NAT / Manual NATRule Types used per SectionNAT
Types used with Twice NAT / Manual NAT and Network Obje...
Table of Contents Introduction:This document describes details on how
NAT-T works. Background: ESP encrypts all critical information,
encapsulating the entire inner TCP/UDP datagram within an ESP header.
ESP is an IP protocol in the same sense that TCP an...