Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. And see here for current known issues.

New Member

ASA 5505 and VPN Tunnel

Hi,

I have an ASA 5505 and I've used the VPN wizard to setup a remote VPN access using IPSec. I would like all the traffic to go through the VPN server, for some reason it sets the gateway to 192.168.10.1 when it should be 192.168.10.251. How can I change this?

This is the config..

group-policy jamesremote attributes

dns-server value 8.8.8.8

vpn-tunnel-protocol ikev1

default-domain value domain.local

tunnel-group jamesremote type remote-access

tunnel-group jamesremote general-attributes

address-pool VPN_Pool

default-group-policy jamesremote

tunnel-group jamesremote ipsec-attributes

ikev1 pre-shared-key *****

VPN Pool is 192.168.10.100 - 192.168.10.120 with 255.255.255.0

Many thanks,

Dmitry

Everyone's tags (1)
218
Views
0
Helpful
0
Replies
CreatePlease login to create content