Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. And see here for current known issues.

New Member

ASA 5505: count traffic

Hi,

There is a server published behind a ASA 5505 with firmware 9.1.1.

Is there a way for counting the amount of data send and received for one specific port?

Kind regards,

Tantony

1 ACCEPTED SOLUTION

Accepted Solutions
VIP Green

ASA 5505: count traffic

An option here would be to run a packet capture on the interface.  You can then open the file in wireshark to analyze it.

For how long do you need collect the statistics?

You might also want to look at Netflow. check out this link for Netflow:

https://supportforums.cisco.com/docs/DOC-6113#_NetFlow_on_the_ASA_vs_IOS

--

Please remember to rate and select a correct answer
4 REPLIES
VIP Green

ASA 5505: count traffic

If you are just looking for the total number of bytes or packets sent and recieved you could just issue the show interface Gig0/0 command ( replacing the interface number with your own of course.)

--

Please remember to rate and select a correct answer
New Member

ASA 5505: count traffic

I need some statistics about specfic ports/protocols on the WAN interface.

Any ideas?

VIP Green

ASA 5505: count traffic

An option here would be to run a packet capture on the interface.  You can then open the file in wireshark to analyze it.

For how long do you need collect the statistics?

You might also want to look at Netflow. check out this link for Netflow:

https://supportforums.cisco.com/docs/DOC-6113#_NetFlow_on_the_ASA_vs_IOS

--

Please remember to rate and select a correct answer
New Member

ASA 5505: count traffic

It seems the only way is Netflow.

Thank you.

215
Views
0
Helpful
4
Replies
CreatePlease login to create content