cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
971
Views
0
Helpful
1
Replies

ASA 5505 - dual wan: wan1 for vpn l2l-wan2 for everything else

Paolo Piutz
Level 1
Level 1

Hi to all.

My goal is to use dual wan (with 2 different ISP):

I would use:

wan1 for all: web, mail, ecc

wan2 only for a vpn l2l connection with HQ (voip, intranet).

Obviously the wans have to work at the same time.

It's possible with asa 5505? (without a router).

Do yuo know some tutorial for that?

Thank you.

1 Reply 1

Julio Carvajal
VIP Alumni
VIP Alumni

Hello Paolo,

It will work as you will specify 2 different destinations on the routing table of the ASA.

It's going to be as simple as that,

Set the 2 interface, configured the proper NAT for those 2 interfaces, set the routes and finally the crypto map on the Wan2.

Regards,

Julio

Remember to rate all the helpful posts, that is as important as a thanks.

Julio Carvajal
Senior Network Security and Core Specialist
CCIE #42930, 2xCCNP, JNCIP-SEC
Getting Started

Find answers to your questions by entering keywords or phrases in the Search bar above. New here? Use these resources to familiarize yourself with the community: