03-27-2014 11:16 PM - edited 03-11-2019 09:00 PM
Hi, i have this configuration on on the Asa client
: Savedz
: Written by enable_15 at 13:39:22.779 UTC Thu Aug 15 2013
!
ASA Version 8.2(5)
!
hostname Lakewood
enable password 8Ry2YjIyt7RRXU24 encrypted
passwd 2KFQnbNIdI.2KYOU encrypted
names
!
interface Ethernet0/0
switchport access vlan 2
!
interface Ethernet0/1
!
interface Ethernet0/2
!
interface Ethernet0/3
!
interface Ethernet0/4
!
interface Ethernet0/5
!
interface Ethernet0/6
!
interface Ethernet0/7
!
interface Vlan1
nameif inside
security-level 100
ip address 172.100.2.1 255.255.255.0
!
interface Vlan2
nameif outside
security-level 0
ip address dhcp setroute
!
ftp mode passive
pager lines 24
logging asdm informational
mtu outside 1500
mtu inside 1500
icmp unreachable rate-limit 1 burst-size 1
no asdm history enable
arp timeout 14400
global (outside) 1 interface
nat (inside) 1 0.0.0.0 0.0.0.0
timeout xlate 3:00:00
timeout conn 1:00:00 half-closed 0:10:00 udp 0:02:00 icmp 0:00:02
timeout sunrpc 0:10:00 h323 0:05:00 h225 1:00:00 mgcp 0:05:00 mgcp-pat 0:05:00
timeout sip 0:30:00 sip_media 0:02:00 sip-invite 0:03:00 sip-disconnect 0:02:00
timeout sip-provisional-media 0:02:00 uauth 0:05:00 absolute
timeout tcp-proxy-reassembly 0:01:00
timeout floating-conn 0:00:00
dynamic-access-policy-record DfltAccessPolicy
http server enable
http 172.100.2.0 255.255.255.0 inside
no snmp-server location
no snmp-server contact
snmp-server enable traps snmp authentication linkup linkdown coldstart
crypto ipsec security-association lifetime seconds 28800
crypto ipsec security-association lifetime kilobytes 4608000
telnet timeout 5
ssh timeout 5
console timeout 0
dhcpd auto_config outside
!
dhcpd address 172.100.2.50-172.100.2.125 inside
dhcpd auto_config outside interface inside
dhcpd enable inside
!
threat-detection basic-threat
threat-detection statistics access-list
no threat-detection statistics tcp-intercept
webvpn
!
class-map inspection_default
match default-inspection-traffic
!
!
policy-map type inspect dns preset_dns_map
parameters
message-length maximum client auto
message-length maximum 512
policy-map global_policy
class inspection_default
inspect dns preset_dns_map
inspect ftp
inspect h323 h225
inspect h323 ras
inspect rsh
inspect rtsp
inspect esmtp
inspect sqlnet
inspect skinny
inspect sunrpc
inspect xdmcp
inspect sip
inspect netbios
inspect tftp
inspect ip-options
!
service-policy global_policy global
prompt hostname context
this asa client is getting dhcp from another asa on another location, the asa on the other side cannot ping devices on the client side
this is the server asa
ASA Version 8.2(1)
!
name 50.66.169.176 OutsideWorld
name 172.100.2.0 Lakewood
!
interface Vlan1
nameif inside
security-level 100
ip address 172.100.1.254 255.255.255.0
!
interface Vlan2
nameif outside
security-level 0
ip address 50.66.202 255.255.255.248
!
interface Vlan3
shutdown
no forward interface Vlan1
nameif dmz
security-level 50
no ip address
!
interface Ethernet0/0
switchport access vlan 2
speed 100
duplex full
!
interface Ethernet0/1
!
interface Ethernet0/2
!
interface Ethernet0/3
!
interface Ethernet0/4
!
interface Ethernet0/5
!
interface Ethernet0/6
!
interface Ethernet0/7
!
what type of configuration is this?
how can i get both sides to ping eachother and allow all the trafic?
thanks in advance.
03-28-2014 01:07 AM
Do you have a diagram of yourt setup and a more detailed description what you want to do?
The public interface of your main ASA looks like you are connecting to the internet. In that case, the IP address for the client has to come from the ISP and not from your main ASA.
Find answers to your questions by entering keywords or phrases in the Search bar above. New here? Use these resources to familiarize yourself with the community: