I'm trying to activate the DMZ interface on a restricted license ASA 5505 but I get an error when I try to ADD the interface. The message says "With the current license device will only supports 2 fully functional interfaces. Third interface can be added,but the traffic from this interface to another interface need to be blocked. Please make appropriate selection in advanced tab." I gather that I have to define the limitation myself? The problem is that I can't access the advanced tab because of the error. Can I do something via CLI to get through? I'm using ASA 8.2 and ASDM 6.2.
Anyway, it's not totally true : the 5505 can use a DMZ but with restricted access. I don't know how to activate the third interface via ASDM, but then I got it up via the following CLI command I found in a forum on the Internet :
no forward interface vlan1
ip address 192.168.1.1 255.255.255.0
Automagically, when I accessed the ASDM, I found a new column in the Interfaces tab named "restrict traffic flow" (at least I believe it wasn't there before!). I can't send traffic from the DMZ to the internal network, but it's not essential for me. I'm happy now.
Login to the FXOS chassis manager.
Direct your browser to https://hostname/, and log-in using the user-name and password.
Go to Help > About and check the current version:
Check the current version availa...
We have configured the outside and inside Interface with official ipv6 adresses, set a default route on outside Interface to our router, we also have definied a rule , which also gets hits, to permit tcp from inside Interface to any6.
In Syslog I also se...