Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements
Step-by-Step Configuration and Troubleshooting Best Practices for the NGFW, NGIPS and AMP Technologies A Visual Guide to the Cisco Firepower Threat Defense (FTD)
Community Member

ASA 5505 NAT config with 9.0 version

 

I have a issue with NAT in ASA 5505 version 9.0 firewal.

1. I have one web server on LOCAL LAN  in ASA firewall with private ip  address. Web application is running on webserver, and I can access this  web application with private ip address from web server itself, But I am  not able to access web application with public NATed ip address(NATED  in ASA firewall) from web server itself.

 

2. From the outside of the firewall the web server application is accessible with public ip address.

 

Public ip 103.15.62.X and server ip 10.0.0.10 please suggest the config with version 9.3 

2 REPLIES
Bronze

Hello, Try this: object

Hello,

 

Try this:

 

object network obj-103.15.62.X 

host 103.15.62.x

object network obj-10.0.0.10

host 10.0.0.10

nat (inside,inside) source dynamic any interface destination static obj-103.15.62.X obj-10.0.0.10

 

Regards,

 

Felipe.

 

 

Remember to rate useful posts.

Community Member

Hello, did the above  

Hello, did the above   suggestion work?

148
Views
0
Helpful
2
Replies
CreatePlease to create content