Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. And see here for current known issues.

New Member

ASA 5505 not working

When i install my ASA5505 i get the following message, could you help me please?

"This platform has a Base license.

Encryption hardware device : Cisco ASA-5505 on-board accelerator (revision 0x0)

                             Boot microcode   :  CNlite-MC-Boot-Cisco-1.2

                             SSL/IKE microcode:  CNlite-MC-IPSEC-Admin-3.03

                             IPSec microcode  :  CNlite-MC-IPSECm-MAIN-2.05

i2c_write_byte_w_suspend() error, slot = 0x0, device = 0x40, address = 26 byte

count = 1. Reason: I2C_UNPOPULATED_ERROR"

1 ACCEPTED SOLUTION

Accepted Solutions
Red

ASA 5505 not working

No not the memory but the unit.

Thanks,
Varun Rao
Security Team,
Cisco TAC

Thanks, Varun Rao Security Team, Cisco TAC
5 REPLIES
Red

ASA 5505 not working

Seems to be hardaware issue, you might need to get the hardware replaced. I would suggest you open a TAC case for it.

Thanks,
Varun Rao
Security Team,
Cisco TAC

Thanks, Varun Rao Security Team, Cisco TAC
New Member

ASA 5505 not working

Thinks, but which hardware should i replace, the memory or the whole asa5505 please tell me

Red

ASA 5505 not working

No not the memory but the unit.

Thanks,
Varun Rao
Security Team,
Cisco TAC

Thanks, Varun Rao Security Team, Cisco TAC
New Member

ASA 5505 not working

You mean the whole unit can not be used any more ?

Red

ASA 5505 not working

For that particualr purpose only a TAC case is needed, if replacement is to be done, it would be done for the whole unit.

Thanks,
Varun Rao
Security Team,
Cisco TAC

Thanks, Varun Rao Security Team, Cisco TAC
411
Views
0
Helpful
5
Replies
CreatePlease login to create content