Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. If you'd prefer to explore, try our test area to get started. And see here for current known issues.

New Member

ASA 5505 ping on outside

Hi,

I have an ASA 5505 ver 8.2 with inside network 192.168.20.0/24 and 192.168.20.254 configured on inside interface.

Also I have an outside interface 10.10.10.1/24 with default gateway 10.10.10.254 assigned on ethernet of router.

On configuration I have :

access-list outside_access_in extended permit icmp any any

access-group outside_access_in in interface outside

route outside 0.0.0.0 0.0.0.0 10.10.10.254

I try to ping from host on inside network the ethernet of the router but I can't do it .

Does anyone help me about ?

best rgeards

Lorenzo

6 REPLIES

Re: ASA 5505 ping on outside

could you show the configuration?

Re: ASA 5505 ping on outside

in any way...

for ping and trace from inside to outside you can do

policy-map global_policy

class inspection_default

inspect icmp

inspect icmp error

New Member

Re: ASA 5505 ping on outside

Hi, Did you use NAT or PAT command? If not then set up these commands and then try. Cheers!!!!!

New Member

Re: ASA 5505 ping on outside

I use pat on outside address,

best regards

Lorenzo

Gold

Re: ASA 5505 ping on outside

your pat statement should look like this then:

global (outside) 1 interface

(or something similar)...

does it?

if you're using the outside interface IP, use the 'interface' keyword in the global statement and not the actual ip of the outside interface.

try adding the following to your outside2in acl:

...permit icmp any any echo-reply

or turn on icmp inpsection.

New Member

Re: ASA 5505 ping on outside

turn on icmp inspection.

496
Views
0
Helpful
6
Replies