Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. And see here for current known issues.

New Member

ASA 5505 transparent mode setup

Hi guys,

i need to configure a ASA 5505 in transparent mode.

learned from Internet, my configuration is :

int e0/0 --- vlan 1---->nameif outside

int e0/4 --- vlan 2------> nameif inside

gloable ip is 172.17.104.10 255.255.255.0

http server enable

http 172.17.104.0 255.255.255.0 inside

when i connect the outside interface to one PC with ip addr 172.17.104.194

my PC connect to inside interface with ip 172.17.104.249

cannot ping each other even when i set rules as permit any any on both direction

2 REPLIES
Red

ASA 5505 transparent mode setup

Hi,

Can you send me an output of "show run interface", moreover you have the https server enabled on the inside interface and not on the outside.

Thanks,

Varun

Thanks, Varun Rao Security Team, Cisco TAC
New Member

Re: ASA 5505 transparent mode setup

hi man thanks for reply the issue was resolved. one vlan was down i did not notice

Sent from my iPhone

818
Views
0
Helpful
2
Replies