cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
3756
Views
0
Helpful
8
Replies

ASA 5505 upgrade ASDM and ASA software

ryankrupp
Level 1
Level 1

Hi,

I have recently tried a upgrade from asa722.bin to asa802-k8.bin and asdm502.bin to asdm6.2.bin. I had renamed the old asa and asdm images. When try to launch the ASDM Manager i get an error 'your asa image has a version number 8.0(2) which is not supported by ASDM5.2' and it kicks me out. I tried to do a reload of default config and it doesn't reload the default config, it just says "loading cached software". Is there away of getting to my ASA 5505 by ASDM launch manager?

1 Accepted Solution

Accepted Solutions

ASA running 8.0.2.. we need to use asdm 6.0.2 .. pls upload asdm-602.bin file on flash .old extension file will not work

then commands

no asdm image flash:/asdm-522.bin

asdm image flash:/asdm-602.bin

View solution in original post

8 Replies 8

srue
Level 7
Level 7

enter this command:

asdm image disk0:/asdm6.2.bin

it gives me error ACSII command

thanks

after i ran asdm image command, i'm still getting the same error and i can't get into the ASDM manager. Any help would be appreciated.

Thanks

this is what i have on my disk0:

Pls do "show version" check if firewall is running on 7.2.2 then we need to use asdm 522 image which in flash.

Pls give a command in configuration prompt

asdm image flash:/asdm-522.bin

write memory

if possible reboot

If you IOS in running 8.0.2 then we need to use asdm 6.0.2 .. pls upload asdm-602.bin file on flash .old file will not work

then commands

no asdm image flash:/asdm-522.bin

asdm image flash:/asdm-602.bin

* pls check http access is enable on firewall .. else give command

http server enable

http 0 0 inside

Hope this helps.

Pls rate if this works so that others can take benefit of this forum

Thanks for the reply. Here's the show version attachment. Hopefully you can help.

Thanks Again.

ASA running 8.0.2.. we need to use asdm 6.0.2 .. pls upload asdm-602.bin file on flash .old extension file will not work

then commands

no asdm image flash:/asdm-522.bin

asdm image flash:/asdm-602.bin

Thanks, i'll give that a try and let you know.

Getting Started

Find answers to your questions by entering keywords or phrases in the Search bar above. New here? Use these resources to familiarize yourself with the community: