Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements
Step-by-Step Configuration and Troubleshooting Best Practices for the NGFW, NGIPS and AMP Technologies A Visual Guide to the Cisco Firepower Threat Defense (FTD)
Community Member

ASA 5505 webVPN (SSL) client

i have a Cisco asa5505 firewall running code 7.2. I uploaded the file (sslclient-win-1.1.3.173.pkg) into the disk0 without any problems, but when i issue "svc image disk0:/sslclient-win-1.1.3.173.pkg" i get an error message saying... ERROR: Not a valid SVC image - extraction failed. what am i missing? Is that not the right file/image?

-Thanks

2 REPLIES

Re: ASA 5505 webVPN (SSL) client

assuming you have the tftp server running with this image try once more.

asa5500# copy tftp flash

Address or name of remote host []? ip of tftp

Source filename []? sslclient-win-1.1.3.173.pkg

Destination filename []? sslclient-win-1.1.3.173.pkg

Re: ASA 5505 webVPN (SSL) client

Hi .. What you are doing is correct. It is most likely a corrupted image. For testing the image .. type the following command. If the image is OK, you should receive a similar output otherwise you might received an ERROR message which indicates the file is probably corrupted in which case I suggest downloading it again from Cisco

ASA505# show webvpn svc

1. disk0:/sslclient-win-1.1.3.173.pkg 1

CISCO STC win2k+ 1.0.0

1,1,3,173

Mon 12/11/2006 18:41:54.43

1 SSL VPN Client(s) installed

1298
Views
0
Helpful
2
Replies
CreatePlease to create content