Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements
Step-by-Step Configuration and Troubleshooting Best Practices for the NGFW, NGIPS and AMP Technologies A Visual Guide to the Cisco Firepower Threat Defense (FTD)
New Member

ASA 5505 wont power on after storm

So im sure I will just have to return it, but after a thunder storm the ASA wont power on. I even had it in a UPS. The AC/DC adapter is rated for 48v and it tested at 47.5v. I looked at the motherboard and I didnt see any burn marks where any resistors might have fried. Is the power adapter supposed to be 48v or highter? that would be a simple cheap fix. Thoughts?

1 REPLY

ASA 5505 wont power on after storm

hi richard,

the power rating is fixed at 48V DC output.

http://www.cisco.com/en/US/docs/security/asa/hw/maintenance/5505guide/asa_5505hw.pdf

you may try replacing the power brick first and see whether it helps.

378
Views
0
Helpful
1
Replies
CreatePlease to create content