In addition to placing the access-group couple of things you may want to check in the event that you already have access-group outside_access_in in interface outside statement in firewall and still no connection.
1-Make sure the server does not have any firewall of its own enable
2- Make sure the server does indeed listen on ports intended, example lets say port 80 for web, or SSL, telnet, ftp etc..
3- do a telnet test towards the server pub ip from an outside host if you can on the ports the server is listening on.
look at the logs on asdm see what it tells you while you try connection from the outside.
Login to the FXOS chassis manager.
Direct your browser to https://hostname/, and log-in using the user-name and password.
Go to Help > About and check the current version:
Check the current version availa...
We have configured the outside and inside Interface with official ipv6 adresses, set a default route on outside Interface to our router, we also have definied a rule , which also gets hits, to permit tcp from inside Interface to any6.
In Syslog I also se...