Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
Announcements
Step-by-Step Configuration and Troubleshooting Best Practices for the NGFW, NGIPS and AMP Technologies A Visual Guide to the Cisco Firepower Threat Defense (FTD)
Community Member

ASA 5506-X, ASDM

Hi,

 

I have few public IP address e.g. xx.xx.xx.210, xx.xx.xx.211 and i dont know how to create NAT 1:1

1.png

I would like to create connection from public IP address xx.xx.xx.211 to local address 192.168.100.200,

from xx.xx.xx.212 to 192.168.100.100

3 REPLIES
Community Member

Re: ASA 5506-X, ASDM

Option 1:

 

I would recommend that you create a object for the inside host (192.168.70.100) and i object for the outside address (xx.xx.xx.212) that you want to use.

 

When this is done you can choose to edit the inside object you created and click to make a "Automatic Address Translation Rule". As translated rule you insert the name of the outside object you created.

 

Option 2:

 

Under configuration in ASDM you also find "Public Servers". Here you can also use the objects you created under option 1.

 

In booth options you can also edit the ports both on the inside and outside object. Also remember to create ACL rules when trying to access the host from the internett.

 

Please rate as helpful, if that would be the case. Thanx
Community Member

Re: ASA 5506-X, ASDM

I think that i have problem with ACL rules.

I created two objects:

outside: Camera1, host, IP address xx.xx.xx.212

inside: Camera_1, host, IP address xx.xx.xx.100

2.PNG

My ACL rules in and out:

3.PNG

4.PNG

 

 

Community Member

Re: ASA 5506-X, ASDM

any suggestions?

380
Views
0
Helpful
3
Replies
CreatePlease to create content