ASA 5510 7.2 two isp problem (not backup or load balancing)
I'm having a problem with an ASA. I have the scenario that is shown in the word document attached. The problem is that, when i create the static route in the ASA, the traffic to the vpn is not forwared to the correct interface. Instead, is forwarded to the default route. the tunnel is well established, but the traffic is not going trough the correct interface. When i point the default route to the adsl 1 interface, everything works fine...but not as the costumer wants
I send the configuration of the ASA. In the configuration is not shown the correct routes, because i had to remove them to leave everything working trough ADSL1.
Re: ASA 5510 7.2 two isp problem (not backup or load balancing)
Not for ASA/PIX, this is a built in feature that allows all traffic that came into the device encrypted to leave out of the "tunneled" default route and all traffic that comes in unencrypted leave via the normal default route.
Table of ContentsIntroductionVersion HistoryPossible Future
UpdatesDocuments PurposeNAT Operation in ASA 8.3+ SectionsRule Types
Network Object NATTwice NAT / Manual NATRule Types used per SectionNAT
Types used with Twice NAT / Manual NAT and Network Obje...
Table of Contents Introduction:This document describes details on how
NAT-T works. Background: ESP encrypts all critical information,
encapsulating the entire inner TCP/UDP datagram within an ESP header.
ESP is an IP protocol in the same sense that TCP an...