Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. If you'd prefer to explore, try our test area to get started. And see here for current known issues.

New Member

ASA 5510 and NAT to two internal addresses

Does the ASA 5510 allow you to static NAT and external address to more than one internal address?

For example, if host A is not available, the NAT from outside in will go to host B?

4 REPLIES
Cisco Employee

Re: ASA 5510 and NAT to two internal addresses

nopes..you will get a static overlap error

New Member

Re: ASA 5510 and NAT to two internal addresses

you can use the same outside address for different host with different ports, for example if you have an FTP server do static for 21 tcp port, and 25 tcp port for another server.

New Member

Re: ASA 5510 and NAT to two internal addresses

As per my point of view, you can map only one internal IP with outside IP, it is possible only in the case of differnt ports otherwise for the same port or same servive it is not possible.

New Member

Re: ASA 5510 and NAT to two internal addresses

if u want to do static nat for one public ip to two internal private ip then its not possible but u can do it for two different ports .

210
Views
10
Helpful
4
Replies