Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Attention: The Community will be in read-only mode on 12/14/2017 from 12:00 am pacific to 11:30 am.

During this time you will only be able to see content. Other interactions such as posting, replying to questions, or marking content as helpful will be disabled for few hours.

We apologize for the inconvenience while we perform important updates to the Community.

New Member

ASA 5510 ASDM access

Hi,

I jus took over this network that has a ASA5510 box. I went through all the diagrams and detials and tried to connect to the Firewall via ASDM loaded in another machine.

When i entered the IP,username and password it waits for sometime and gives a timeout error. I do not know how to connect otherwise.

Please help.

3 REPLIES
New Member

Re: ASA 5510 ASDM access

With the 5510 and most other cisco security appliances you need to specify what has access to the appliance via ssh, telnet, http/asdm.

Example

hostname(config)# http 192.168.3.0 255.255.255.0 inside

You are probably getting that error because that machine does not have access to the ASA via ASDM. Here is a document that should help clear some more things up.

http://www.cisco.com/en/US/docs/security/asa/asa71/configuration/guide/mgaccess.html

Please rate if this is helpful. Thanks

New Member

Re: ASA 5510 ASDM access

Thanks for the info. This was working fine previously according to the previous person who was administering but after CISCO support logged into our appliance and did some configuration it is not working.

I am not very familiar with command line interface. Should i call CISCO support again?

New Member

Re: ASA 5510 ASDM access

Console cable.... plug it into the console port

184
Views
4
Helpful
3
Replies
CreatePlease to create content