Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements
Step-by-Step Configuration and Troubleshooting Best Practices for the NGFW, NGIPS and AMP Technologies A Visual Guide to the Cisco Firepower Threat Defense (FTD)
Community Member

ASA 5510 Boot failure

My ASA 5510 Suddenly stopped working - now it hangs in this boot loop.

After 5 attempts to boot it hangs.

I have tried hardware reset. Nothing happens.

Any help appreciated

Booting system, please wait...


CISCO SYSTEMS
Embedded BIOS Version 1.0(11)4 03/21/08 17:09:54.41

Low Memory: 631 KB
High Memory: 256 MB
PCI Device Table.
Bus Dev Func VendID DevID Class              Irq
00  00  00   8086   2578  Host Bridge
00  01  00   8086   2579  PCI-to-PCI Bridge
00  03  00   8086   257B  PCI-to-PCI Bridge
00  1C  00   8086   25AE  PCI-to-PCI Bridge
00  1D  00   8086   25A9  Serial Bus         11
00  1D  01   8086   25AA  Serial Bus         10
00  1D  04   8086   25AB  System
00  1D  05   8086   25AC  IRQ Controller
00  1D  07   8086   25AD  Serial Bus         9
00  1E  00   8086   244E  PCI-to-PCI Bridge
00  1F  00   8086   25A1  ISA Bridge
00  1F  02   8086   25A3  IDE Controller     11
00  1F  03   8086   25A4  Serial Bus         5
00  1F  05   8086   25A6  Audio              5
02  01  00   8086   1075  Ethernet           11
03  01  00   177D   0003  Encrypt/Decrypt    9
03  02  00   8086   1079  Ethernet           9
03  02  01   8086   1079  Ethernet           9
03  03  00   8086   1079  Ethernet           9
03  03  01   8086   1079  Ethernet           9
04  02  00   8086   1209  Ethernet           11
04  03  00   8086   1209  Ethernet           5

Evaluating BIOS Options ...
Launch BIOS Extension to setup ROMMON


Booting system, please wait...


CISCO SYSTEMS
Embedded BIOS Version 1.0(11)4 03/21/08 17:09:54.41

4 REPLIES

Re: ASA 5510 Boot failure

It could be a hardware issue.

Was there any software/hardware/configuration change on this ASA before the issue happened?

Community Member

Re: ASA 5510 Boot failure

There has been no hardware or software change for a long time.

I do suspect hardware failure, but I would expect an error message indication the nature of error.

Re: ASA 5510 Boot failure

Was it all info you saw in the console that you provided in your first post.

If yes, it did not launch bootloader.I guess you might have to replace it.

Community Member

Re: ASA 5510 Boot failure

Yes the boot sequence as provided in first post repeated it selves 5 times then the ASA halted.

1336
Views
0
Helpful
4
Replies
CreatePlease to create content