I tried to make ASA 5510 work as it mentioned in the Getting Started Guide that came with the ASA appliance. It is a basic DMZ scenario where I have a web server running on 10.30.30.30 and outside interface on ASA is 22.214.171.124. I followed all the steps mentioned in the guide. For step 1, I configured IP pools for Network Translation, For step 2, I configured Address Translations on Private Networks. For Step 3, I defined external identity of the web server that is 126.96.36.199. And for step 4 , I provided http access to the web server.
The problem is when I connect a pc on a outside network, I was not able to access the web server. I could ping web server (10.30.30.30) from ASA but not from a pc that is connected to outside interface. Is it a routing problem? Do I need to do something else?
Login to the FXOS chassis manager.
Direct your browser to https://hostname/, and log-in using the user-name and password.
Go to Help > About and check the current version:
Check the current version availa...
We have configured the outside and inside Interface with official ipv6 adresses, set a default route on outside Interface to our router, we also have definied a rule , which also gets hits, to permit tcp from inside Interface to any6.
In Syslog I also se...