Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. If you'd prefer to explore, try our test area to get started. And see here for current known issues.

New Member

ASA 5510 ftp traffic passing on 1 interface but not another

I have a 5510 running 8.4

FTP traffic routed from outside to the inside interface works fine.  I have another interface with multiple sub-interfaces and vlans configured.  FTP traffic routed from the outside to vlan2_servers is not making it through the firewall.  I must be missing something.  I have attached my config.  Any assistance would be greatly appreciated.

Everyone's tags (3)
1 ACCEPTED SOLUTION

Accepted Solutions

ASA 5510 ftp traffic passing on 1 interface but not another

Hello Jennifer,

So you are trying to access the FTP server from the outside.

Can you change this:

object network FTPServer1

nat (any,outside) static xxx.xxx.xxx.105

to

object network FTPServer1

nat (vlan2,outside) static xxx.xxx.xxx.105

Please rate helpful posts.

Regard,

Julio

Looking for some Networking Assistance? Contact me directly at jcarvaja@laguiadelnetworking.com I will fix your problem ASAP. Cheers, Julio Carvajal Segura http://laguiadelnetworking.com
4 REPLIES

ASA 5510 ftp traffic passing on 1 interface but not another

Hello Jennifer,

May I have some information related to this case:

-Where is the FTP server (Outside or Vlan2)

- Are you running passive FTP?

-What is the private ip address of the host on vlan 2

Regards,

Julio

Looking for some Networking Assistance? Contact me directly at jcarvaja@laguiadelnetworking.com I will fix your problem ASAP. Cheers, Julio Carvajal Segura http://laguiadelnetworking.com
New Member

ASA 5510 ftp traffic passing on 1 interface but not another

Hi Julio,

Thanks for responding.

The FTP server is on vlan2

I am running passive FTP

The private address of the FTP server on vlan2 is 10.118.2.133

ASA 5510 ftp traffic passing on 1 interface but not another

Hello Jennifer,

So you are trying to access the FTP server from the outside.

Can you change this:

object network FTPServer1

nat (any,outside) static xxx.xxx.xxx.105

to

object network FTPServer1

nat (vlan2,outside) static xxx.xxx.xxx.105

Please rate helpful posts.

Regard,

Julio

Looking for some Networking Assistance? Contact me directly at jcarvaja@laguiadelnetworking.com I will fix your problem ASAP. Cheers, Julio Carvajal Segura http://laguiadelnetworking.com
New Member

ASA 5510 ftp traffic passing on 1 interface but not another

That worked.  Thank you!

595
Views
0
Helpful
4
Replies