Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. And see here for current known issues.

New Member

ASA 5510 internet speed problem

Hi

we are having asa5510 firewall in our office in which we were connected 20mbps internet.  but recently we upgraded to 400mpbs internet but when we check the speed test its showing only 100 mbps.  so can anyone advice me whether asa 5510 outside interface supports 400mbps connection.  is there anything i can do in the firewall in order to support all 400 mbps connection

Everyone's tags (1)
1 ACCEPTED SOLUTION

Accepted Solutions
Hall of Fame Super Silver

(Moved thread to Security >

(Moved thread to Security > Firewalling)

An ASA 5510 with the default Base license is limited to 100 Mbps Fast Ethernet interfaces. If you have the upgraded Security Plus license, you get two interfaces bumped up to 1 Gbps. However the aggregated throughput of the appliance is only 300 Mbps. Note AGGREGATED i.e., not for a single flow.

in practical application, if you want to fully utilize your 400 Mbps circuit you should consider upgrading your platform (which has been end of sales for several years) to something like an ASA 5516-X. 

1 REPLY
Hall of Fame Super Silver

(Moved thread to Security >

(Moved thread to Security > Firewalling)

An ASA 5510 with the default Base license is limited to 100 Mbps Fast Ethernet interfaces. If you have the upgraded Security Plus license, you get two interfaces bumped up to 1 Gbps. However the aggregated throughput of the appliance is only 300 Mbps. Note AGGREGATED i.e., not for a single flow.

in practical application, if you want to fully utilize your 400 Mbps circuit you should consider upgrading your platform (which has been end of sales for several years) to something like an ASA 5516-X. 

25
Views
0
Helpful
1
Replies
CreatePlease login to create content