ASA 5510 IPSec VPN Issue

[kthomas00]

Hello,

We have a new ASA 5510. We have it setup with a site-to-site VPN with a remote office. That works without any issues. I started to configure the remote access IP Sec VPN and can connect to our LAN and DMZ without any issues. The problem I am having is connecting to the remote office while on the IPSec VPN. Any ideas on what I need to check in order to connect to the remote office while on the VPN?

Thanks!

[brettmilborrow]

Hi,

This is possible, you should just need to update the al that goes to the remote site to include the VPN client pool and you will also need the following command:

same-security-traffic permit intra-interface

Have a look at this page:

http://www.cisco.com/en/US/products/hw/vpndevc/ps2030/products_configuration_example09186a008046f307.shtml