After I installed the asa5510 with failover feature, I found that the ftp/netbios download traffic on primary unit was about 1.2Mb, so I forced the secondary unit to takeover these traffic instead of primary unit, I found that the throughtput was about 50Mb, Please anyone help me to identify this problem.
1. Outside and inside interfaces don't have any error.
2. When connect PC directly to ASA on outside and inside interface and testing download via ftp/netbios, the problem still occured.
Thanks for your help, yesterday I tried to change interface inside with speed & duplex auto and forced outside interface with speed100 duplexFull, so it work, but I don't know why the secondary unit has work without manually configured on both interfaces. Could you explain me?
BenefitsDocumentationPrerequisiteImage Download LinksLimitationsSupported PlatformsLicense RequirementsTopologyStep-By-Step ConfigurationConfigure Virtual ServiceActivate the virtual service and configure guest IPsConfiguring UTD (Service Plane)Configurin...
Login to the FXOS chassis manager.
Direct your browser to https://hostname/, and log-in using the user-name and password.
Go to Help > About and check the current version:
Check the current version availa...
We have configured the outside and inside Interface with official ipv6 adresses, set a default route on outside Interface to our router, we also have definied a rule , which also gets hits, to permit tcp from inside Interface to any6.
In Syslog I also se...