ASA 5510 - real-time traffic monitoring

[Tibor Marchyn]

Hi,

I need to monitor realtime traffic and filter it for example by destination port on ASA 5510.

I have found that in ASDM is real-time log viewver, but even I start it in debug mode I cannot see traffic I need.

I need to get all attempts to access any IP on destination port 21 which come from internal network and going outside to WAN.

Can you advice please?

Thanks           

[johnlloyd_13]

Hi,

You can use the 'show conn' command. Just use the pipe '|' to filter the specific info or for this case port 21.

show conn | i 21

Sent from Cisco Technical Support iPhone App